Ecostrad VeeSmart
7
4. It must be ensured that the circuit in the electrical installation to
which the radiator is connected has an appropriate overcurrent cir-
cuit breaker and a residual current device (R.C.D.) with a sensitivi
-
ty of 30 mA. With the permanent (hard-wired) installation it is also
mandatory to have an omni polar cut-off for disconnecting the de
-
vice on all poles, by points of contact with the clearance of 3 mm.
5. The device can be installed in bathrooms in Zone 2, but
at least
1m from any water source, (as defined by applicable law, subject to
any additional regulations concerning electrical installations in wet
areas).
6. Do not use extension cords or adapters for electrical outlets to plug
the product.
