7. With the template properly located, peel off the protective backing from the
Main Antenna Unit. Starting with the front, carefully place the unit into the
template and, using steady pressure, firmly press the Main Antenna Unit
down onto the glass for a minimum of 60 seconds, as shown in Figure 11.
NOTE: Do not remove the Installation Template at this time.
Figure 11. Firmly pressing down on the Main Antenna Unit.
8. Adjust the antenna mast so it is completely vertical (i.e., perpendicular) to the
ground, as shown in Figure 12.
Figure 12. Adjusting the antenna mast so that it’s perpendicular to the ground.
Continued on next page...
Installation
9
TRK-SR1 I
NSTALLATION
G
UIDE
TRK-SR1 Main Antenna Unit
(Side View)
Ground
Vehicle Glass
TRK-SR1 Install Guide 8/29/01 9:06 AM Page 9
