Operator's Manual
First Edition • First Printing
22
T70 • T90 • T120
Part No. 134207
Do Not Operate Unless:
You learn and practice the principles of safe
generator operation contained in this operator's
manual.
1 Avoid hazardous situations.
2 Always perform a pre-operation inspection.
3 Follow the setup instructions.
Know and
understand the setup instructions before
going on to the next section.
4 Follow the operating, transport and lifting
instructions.
5 Only use the generator set as it was intended.
Setup
Fundamentals
The setup section provides instructions for setting
up the generator set in the work place so it can be
used safely.
It is the operator's responsibility to follow all the
safety rules and instructions in the operator's
manual.
Move the generator set to the desired location with
the following in mind:
•
The spot where the generator set is positioned
should be relatively level.
•
The location selected should be centrally
located to the equipment requiring the loads to
minimize voltage drop in the power cord.
•
Locate the machine so the power cords can be
routed without crossing roads and access
routes.
•
Locate the machine where the engine will get
proper ventillation. Avoid locations where fumes
can enter a building.
•
Do not place the machine beside a building wall
that would reflect and intensify noise.
Summary of Contents for T120C
Page 51: ......
