Section 4 • Troubleshooting
September 2008
Part No. 134277
T70, T90 & T120 Super Quiet Generator
4 - 1
Before Troubleshooting:
Read, understand and obey the safety rules
and operating instructions in the appropriate
operator's manual on your machine.
Be sure that all necessary tools and test
equipment are available and ready for use.
Be aware of the following hazards and follow
generally accepted safe workshop practices.
Electrocution hazard. Exposure to
electrically charged circuits could
result in death or serious injury.
Remove all rings, watches and
other jewelry.
Electrocution hazard. Attempting
to sevice the machine before the
capacitors are fully discharged will
result in death or serious injury.
High voltage. Exposure to
electrical wires or electrical current
will result in death or serious
injury. Remove all rings, watches
and other jewelry. Turn off all
power when not needed for
testing. Use extreme caution when
working with high voltage electrical
components.
Burn hazard. Contact with hot
engine components may cause
severe burns. Use caution when
working around a hot engine.
Troubleshooting
Observe and Obey:
Troubleshooting and repair procedures shall be
completed by a person trained and qualified on
the repair of this machine.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating the machine.
Unless otherwise specified, perform each
repair procedure with the machine in the
following configuration:
· Machine parked on a firm, level surface.
· Wheels chocked.
· Toggle switch in "OFF" position.
Summary of Contents for T12009-000101
Page 47: ......
