Compact Track Loader
12. Loader Disassembly and Assembly
12-2
Collect and contain liquids in a suitable
container. Dispose of all liquids according to local
regulations and mandates.
Note
: During disassembly, cap all hoses and fittings to
prevent fluid loss and contamination of the system fluids.
1.
Lower the loader arms onto a mechanical
support with the arms resting about 6 inches
(15.24 cm) off the ground.
2.
Turn the ignition switch to the OFF position.
Figure 12-1
3.
Remove the bolt on the pin assembly on the
loader tower.
Figure 12-2
4.
Remove the pin assembly.
Figure 12-3
5.
Remove and cap the hose on the base end of
the cylinder.
Figure 12-4
6.
Remove and cap the hose on the loader end of
the cylinder.
Figure 12-5
7.
Remove the forward pin assembly bolt.
Remove
Hose
Remove
Pin
Remove
Bolt
Remove
Hose
Remove
Bolt
Lift
Cylinder
