Terex Genie Z-34/22DC, Operator'S Manual

Page: 32 / 56

Operator's Manual
Seventh Edition • First Printing
Inspections
30 Z
®
-
34/22N • Z
®
-34/22DC Part No. 1297937GT
Test Aircraft Protection Package
(if equipped)
Note: Two people may be required to perform this
test.
69 Extend the primary boom approximately
1 ft/30 cm.
70 Move the yellow bumper at the bottom of the
platform 4 inches/10 cm in any direction.
71 Activate each function control handle or toggle
switch.
Result: No boom and steer functions should
operate.
72 Move and hold the aircraft
protection override switch.
73 Activate each function control handle or toggle
switch.
Result: All boom and steer functions should
operate.
Test the Contact Alarm (if equipped)
74 Do not activate the foot switch and press on the
contact alarm cable to release the actuator
from the switch socket.
Result: The contact alarm lights will not flash
and the machine horn will not sound.
75 Activate the foot switch by pressing the foot
switch down.
Result: The contact alarm lights will flash and
the machine horn will sound.
76 Insert the actuator into the switch socket.
Result: The lights and horn will turn off.
77 Activate the foot switch by pressing the foot
switch down and press on the contact alarm
cable to release the actuator from the switch
socket.
Result: The contact alarm lights will flash and
the machine horn will sound.