Terex Genie Z-25J, Operator'S Manual

Page: 60 / 71

Operator's Manual
Sixth Edition • First Printing
Operating Instructions
58 Z
®
-45/25J Part No. 1299167GT
Contact Alarm (if equipped)
The contact alarm is designed to alert ground
personnel when an operator makes contact with
the platform control panel, interrupting boom
movement, sounding an alarm and flashing
warning lights.
When the contact alarm cable is tripped, the lift
and drive functions are disabled at the platform.
The audio and visual warnings will activate alerting
others that assistance may be needed. These
notifications will continue until the system is reset.
1 The contact alarm cable is tripped, releasing
the actuator from the switch socket.
2 Insert the actuator into the switch socket to
turn off flashing lights and audio alarm.
1 actuator
2 contact alarm cable
3 flashing alarm
4 switch socket
After Each Use
1 Select a safe parking location
—firm level
surface, clear of obstruction and traffic.
2 Retract and lower the boom to the stowed
position.
3 Rotate the turntable so that the boom is
between the non-steer wheels.
4 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
5 Chock the wheels.