Terex Genie Z-25J, Operator'S Manual, Page: 41 / 71

Sixth Edition • First Printing
Operator's Manual
Inspections
Part No. 1299167GT Z
®
-45/25J 39
At the Platform Controls
Test Emergency Stop
15 Turn the key switch to platform control and
restart the engine.
16 Push in the platform red Emergency Stop
button to the off position.
Result: The engine will shut off after 2 to
3 seconds.
17 Pull out the red Emergency Stop button and
restart the engine.
Test the Horn
18 Press the horn button.
Result: The horn should sound.
Test the Foot Switch
19 Push in the platform red Emergency Stop
button to the off position.
20 Pull out the red Emergency Stop button to the
on position and do not start the engine.
21 Press down the foot switch and attempt to
start the engine by moving the start toggle
switch to either side.
Result: The engine should not start.
22 Do not press down the foot switch and restart
the engine.
Result: The engine should start.
23 Do not press down the foot switch and test
each machine function.
Result: No functions should operate.
Test Machine Functions
24 Press down the foot switch.
25 Activate each machine function control handle
or toggle switch.
Result: All boom and platform functions should
operate through a full cycle.
Test the Steering
26 Press down the foot switch.
27 Press the thumb rocker switch on top of the
drive control handle in the direction indicated
by the blue triangle on the control panel OR
slowly move the control handle in the direction
indicated by the blue triangle.
Result: The steer wheels should turn in the
direction that the blue triangles point on the
drive chassis.
28 Press the thumb rocker switch in the direction
indicated by the yellow triangle on the control
panel OR slowly move the control handle in
the direction indicated by the yellow triangle.
Result: The steer wheels should turn in the
direction that the yellow triangles point on the
drive chassis.