Terex Genie GS-2669DC, Operator'S Manual, Page: 37 / 60

Second Edition • Second Printing Operator's Manual
Inspections
Part No. 1305659GT GS ™ -2669DC • GS ™ -3369DC • GS ™ -4069DC 35
60 Press the drive function button.
61 Press and hold the function enable switch on
the control handle.
62 Slowly move the control handle in the direction
indicated by the blue arrow, then in the
direction indicated by the yellow arrow.
Result: The machine should not move in the
directions indicated by the blue and yellow
arrows.
63 Press the drive function button.
64 Press and hold the function enable switch on
the control handle.
65 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
blue and yellow triangles on the control panel.
Result: The steer wheels should not turn in the
directions indicated by the blue and yellow
triangles.
66 Raise the platform.
Result: The platform should raise. Raise the
platform to approximately 8 ft / 2.4 m and stop.
67 Fully lower the platform.
68 Press the outrigger function button.
69 Wait seven seconds for the outrigger function
enable to time out.
70 Slowly move the control handle in the direction
indicated by the blue arrow, then in the
direction indicated by the yellow arrow.
Result: The outriggers should not retract.
71 Press the outrigger function button.
72 Move the control handle in the direction
indicated by the blue arrow.
Result: The outriggers should retract. The
individual outrigger indicator lights will turn
solid green as the corresponding outrigger
retracts.
73 Continue holding the control handle until the
outriggers are completely retracted. Release
the control handle when all outrigger indicator
lights turn off. All functions are now restored.
Note: If the control handle is released too soon
during retraction, the outrigger indicator lights will
flash green, indicating the outriggers are not fully
retracted.