Operator's Manual
Fifth Edition · First Printing
38
GS-2668 DC • GS-3268 DC
Part No. 133556
Operating Instructions
Error Indicator Readout
If the LED diagnostic readout
displays a fault code, such as LL,
push in and pull out the red
Emergency Stop button to reset the
system.
To Extend and Retract Platform
(Manual Platform Extension)
1 Lift the platform extension lock handle to the
horizontal position.
2 Push the platform extension lock handle to
extend the platform to the desired position.
Do not stand on the platform extension while trying
to extend it.
3 Lower the platform extension lock handle.
Operation From Ground with
Controller
Maintain safe distances between the operator, the
machine and fixed objects.
Be aware of the direction the machine will travel
when using the controller.
Battery Level Indicator
Use the LED diagnostic readout on the platform
controls to determine the battery level.
Fall Protection
Personal fall protection equipment (PFPE) is not
required when operating this machine. If PFPE is
required by job site or employer rules, the following
shall apply:
All PFPE must comply with applicable
governmental regulations and must be inspected
and used in accordance with the manufacturer’s
instructions.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstructions and traffic.
2 Lower the platform.
3 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
4 Chock the wheels.
5 Charge the batteries.
Full Low
Summary of Contents for Genie GS-2668DC
Page 1: ......
