Instructions
Rev A
Introduction
2
ALC-600 Software Update
Part No. 1295343GT
Intr oducti on
Intr oducti on
Observe and Obey:
This procedure shall be completed by a person
trained and qualified on the repair of this
machine.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating the machine.
Before Starting Installation:
Read, understand and obey the safety rules
and operating instructions in the appropriate
operator's manual.
Be sure that all necessary tools and parts are
available and ready for use.
Read this procedure completely and adhere to
the instructions. Attempting shortcuts may
produce hazardous conditions.
Indicates that a specific result is expected
after performing a series of steps.
Indicates that an incorrect result has occurred
after performing a series of steps.
Genie, "S" and "Z" are registered trademarks of
Terex South Dakota, Inc. in the U.S.A. and many
other countries.
"TraX" and "XC" are trademarks of Terex South
Dakota, Inc.
Models Included
Model
From serial number
S-40 XC
S40XCH-101
S-40 TraX
S-45 XC
S45XCH-101
S-45 TraX
S-60 XC
S60XCH-45001
S-60 TraX
S60XCM-101
S-65 XC
S65XCH-45001
S-65 TraX
S65XCM-101
S-80 HF
S80XCH-101
S-80 XC
S-85 HF
S85XCH-101
S-85 XC
If you have any further questions regarding these
instructions or need assistance, please contact
Genie Product Support at one of the following
telephone numbers:
United States:
+ 800 536 1800
Canada:
+ 425 881 1800
Europe:
UK
+ 44 1476 584 333
France
+ 33 237 260 986
Germany
+ 49 421 3770 9890
Iberica
+ 34 935 725 090
Italy
+ 39 075 941 8132
Scandinavia
+ 46 3157 5154
Other locations
+ 31 165 51 93 22
Middle East:
+ 97 143 391 800 or
+ 97 150 459 7937
Australia:
+ 61 7 3456 4444
Brazil
+ 0 800 031 0100
South America - other
locations
+ 56 9 6431 2110
All other locations
+ 1 425-881 1800
