Operator's Manual
First Edition • First Printing
8
AL4000 • AL5000
Part No. 116416
Work Area Safety
Do not alter or disable machine components that in
any way affect safety and stability.
Do not adjust or stow the outriggers when the tower
is raised.
Do not place ladders or
scaffolds against any part of
the machine.
Do not use the machine on a
moving or mobile surface or
vehicle.
Crushing Hazards
Do not lower the tower
unless the area below is
clear of personnel and
obstructions.
Keep hands and fingers
away from any potential
pinch points.
Burn Hazards
Do not touch the lamp
fixtures while they are turned
on. Turn the lamps off and
allow them to cool before
touching.
Do not touch hot parts of the
engine or tailpipe. Use
protective gloves when
handling hot parts.
Bodily Injury Hazards
Do not use the machine indoors unless properly
ventilated.
Do not breathe exhaust fumes.
Do not work on this equipment when mentally or
physically fatigued.
Do not work on this equipment when under the
influence of drugs or alcohol.
Do not use the machine if the protective barrier on
any of the lamps is broken or punctured. Metal
halide lamps produce shortwave ultra-violet
radiation and can cause serious skin burns or eye
inflammation if the protective barrier is not in
place.
Stay clear of the moving tower.
Fall Hazards
Do not climb or stand on any part of the light
tower.
Damaged Machine Hazards
Do not use a damaged or malfunctioning machine.
Be sure the operator's manual is complete, legible
and in the storage container located on the
machine.
Be sure all decals are legible and in place.
Component Damage Hazard
Do not turn the lights on unless the engine is
running. Always turn the lights off before shutting
down the engine.
Do not tow the light tower while the lamps are hot.
Hot lamps will break if moved.
Do not replace lamp bulbs with any bulbs other
than those specified on the machine and in this
manual.
Summary of Contents for AL5000
Page 1: ......
