XM429-V1.2-C
49
2
．
Press <Up/Down>, the display will show
“
45
℃”
, Temperature generally in 20~79
℃
.
3
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.3.6 Lamp off at temp.
With this function you can set the inside temperature at which the projector will automatically
switch the lamp off.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Lamp
Control
”
is displayed. Press ENTER, the display will show
“
Lamp Control
”
. Tap the
<Up/Down>button until the display will show
“
Lamp Off at Temp
”
. Press ENTER, the
display will show
“
Lamp Off at Temp
”
.
2
．
Press <Up/Down>, the display will show
“
130
℃”
, Temperature generally in 80~139
℃
.
3
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
When the temperature around the lamp is higher than the preset value continuously up to
5 minutes, the lamp will be shut off automatically.
If the lamp be shut off automatically due to over heat, it can not be striked again
automatically, it must be turned on again by manually.
9.4 PERSONALITY
9.4.1 Status setting
Address via DMX
With this function, you can adjust the desired DMX-address via an external controller.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Personality
”
is displayed. Press ENTER, the display will show
“
Personality
”
. Tap
the <Up/Down>button until the display will show
“
Status setting
”
. Press ENTER, the
display will show
“
Status setting
”
.
2
．
Press <Up/Down>, the display will show
“
Address via DMX
”
.
3
．
Press< ENTER>, the display will show
“
Address via DMX
”
.
4
．
The display show
“
ON
”
,Press <Up/Down>, the display will show
“
OFF
”
.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
No DMX Status
With this function, when the drive is not DMX signal, it runs automatism, close, hold and
music, the default is hold.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Personality
”
is displayed. Press ENTER, the display will show
“
Personality
”
. Tap the
<Up/Down>button until the display will show
“
Status setting
”
. Press ENTER, the
display will show
“
Status setting
”
.
2
．
Press <Up/Down>, the display will show
“
No DMX Status
”
.
3
．
Press< ENTER>, the display will show
“
No DMX Status
”
.
4
．
The display show
“
Hold
”
,Press <Up/Down>, the display will show “Close”, “Auto”,
“Music”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
