Terasic HSMC-NET, User Manual

Page: 28 / 32

27

Bit Stream used: DE3_NET_DDR2.sof & simple_socket_server.elf

Note: To compile the Quartus Project requires the Triple-Speed Ethernet License which can be
obtained from Altera.

Confirm the THCB-HFF adaptor is connected to the DE3 HSTC connector before connecting
the HSMC-NET daughter board

Power on the DE3 board, with the USB cable connected to the USB Blaster port as well as
connecting the Ethernet Cable from the Gateway device to the Ethernet Transceiver

Open the Simple Socket Server by executing the de3_net.bat file where the IP address and port
number are assigned as shown below in
Figure 4-12 .
Figure 4-12 Simple Socket Server

To establish connection, start the telnet client session by executing open_telnet.bat file and
include the IP address assigned by the DHCP server-provided IP along with the port number as
shown below in
Figure 4-13 .