Teral Patron SP-40, Operation Manual

Page: 9 / 12

If the pump must be disassembled for repair, please contact an Authorized Dealer
in your area.
_&.
WARNING
Accidental starting of the pump can cause severe injury or death.
ALWAYS,
disconnect the electrical power before examining/working on the pump.
For heavy parts, use a hoist lift to avoid injury.
_&.
CAUTIONS
Disassembling the pump or modifying the pump will void manufacturer warranty.
ALWAYS, check that the voltage and amperage readings are in line with the nameplate
of the pump. Check if the water level is normal.
STORAGE:
_&.
NOTICE
If the pump will not be used for a long period of time, wash the pump under tap water
removing any debris. Allow the pump to dry and then store indoors. Before, reinstalling
perform a test run to ensure it is operating correctly and within the parameters stated on
the nameplate
6
4
0
4
5
NO. PART NAME
1
CABLE
2
HANDLE
3
UPPER COVER
4
CAPACITOR
5
BEARING
6
BRACKET
7 SHAFT
+------------11
NO. PART NAME NO. PARTNAME
8 MOTOR CASE
15
CASING
9 BEARING
16
NUT
10
LUBRICANT
11
OIL PLUG
12
MECHANICAL SEAL
13
OIL SEAL
14
IMPELLER
7