Terafence MBsecure, Installation And Configuration Manual

Page: 8 / 14

-6-
MBsecure Installation
What’s in the box
Item Quantity
MBsecure device 1
5 VDC Power Supply 3
Installation and Operation manual 1
Warranty Card 1
Installing MBsecure
1. Unpack the device and verify that the box content is as listed in What’s in the box section.
2. Connect both Module A and Module B to the same network switch using RJ45 Ethernet
cables (not provided with the device).
3. Connect a computer to the same network switch.
4. Configure the computer Ethernet port settings to:
a. IP address: 192.168.1.3
b. Subnet MASK: 255.255.255.0
5. Connect the power supplies to the device. Wait for the device to boot.
CAUTION!
Be sure to follow the Power Supply polarity labels on the rear panel. Switching
the poles may cause damage to the device.
6. Open your Internet Browser and access the unit at IP address 192.168.1.1. the Login
screen will be displayed.
Figure 3: MBsecure Login menu