TCW280_R1.2 – February 2019
Page 15
6.3.
Services
6.3.1.
Modbus
TCW280 supports Modbus TCP/IP.
By default Modbus is disabled. Standard port for this protocol is 502. More about this functionality
can be read at MODBUS section below.
6.3.2.
SNMP
TCW280 supports SNMP v.2.
In this section, all necessary parameters for proper operation of SNMP can be set.
By default SNMP is disabled, the port is 161, read community is “public” and write community is
“private”.
In an alarm condition, SNMP trap can be sent up to 5 independent recipients. All they can be with
different port and community. There is an independent button for trap test.
SNMP traps can be sent:
•
In case of an open circuit for analog output in current loop mode;
•
After restart;
•
After power on.
Actual MIB file can be downloaded from here.
Summary of Contents for TCW280
Page 1: ......
Page 34: ...TCW280_R1 2 February 2019 Page 34 Fig 1 Fig 2...
