11.Firmware update
TCW180
supports remote firmware update. To do this please follow the steps below:
-
Download the latest firmware version from
www.teracom.cc
. The extension of
the update file is .cod .
-
Open Command Prompt window. In the example below in
blue
are the
commands that must be entered, and in
red
are the descriptions of these
commands :
C:\> --
go to the directory where the update file is located ( .cod extension)
C:\>
ftp 212.73.154.53
--
FTP connection to the controller is made
Connected to 212.73.154.53.
220 Ready
User (212.73.154.53:(none)):
admin
--
enter username
331 Password required
Password:
*****
--
enter password
230 Logged in
ftp>
put tcw180v1.00.cod
--
the update file is sent for update
200 Ok
150 Transferring data...
150 DON’T UNPLUG POWER CABLE FOR NEXT 2 MINUTES!!! –
2 minutes after this message
appears, the device will be successfully updated
ftp: 157822 bytes sent in 60.89Seconds 2.59Kbytes/sec
ftp>
Rev . 1 – May, 2011
DO NOT TURN OFF THE POWER SUPPLY DURING THESE 2 MINUTES!
TURNING OFF THE POWER SUPPLY WILL DAMAGE THE DEVICE!
