TCW122B-WD_R2 ( Firmware version 2.xx )
Page 13
15.
Factory default settings
TCW122B-WD
can be restored to its original factory default settings, following the steps below:
Turn off the power supply;
Press and hold the RESET button then turn on the power supply;
The LED’s STS and LOG will flash 14 times, after that they will turn on. In this moment the RESET
button should be released.
The factory default settings are:
User Name (Admin)
admin
Password (Admin)
admin
IP Address
192.168.1.2
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.1
SNMP Configuration
disabled
Read Community
public
Write Community
private
16.
Firmware update
TCW122B-WD
supports remote firmware update. To update the device follow the steps below:
-
Go to
www.teracom.cc
and download the latest firmware version file (
v2.XX.cod
) from
TCW122B-WD product page;
-
Go to the device login page, enter user name and password and press the “Login” button;
-
Go to “Update” menu, select the update .cod file and press “upload” button;
-
After the firmware update is completed, you will be forwarded to the device Login page.
Attention! Don’t turn off the power supply during the update. Turning off the power supply will
damage the device.
Rev.2.0 – March 2013
