Copyright © Terabee 2016
name)
The distance data will now appear on the terminal in “Binary” mode and will look like this:
Press the commands Shift+T to switch from binary mode to “Text” mode. This will display the
distance values in millimeters, as follows:
To change the sensor from its fast mode to its precision mode, press:
Shift+F for “Fast” mode
Shift+P for “Precision” mode
Shift+O for “Optimal” mode
To stop the data measurement, press:
Ctrl+A then K
2.3
Linux
Linux is very similar to MacOS and also works with a terminal.
Open a terminal (shortcut: ctrl+alt+t):
type: ls /dev/tty*
90 Rue Henri Fabre
Website:
01630 St. Genis‐Pouilly
Technical support:
France (next to CERN)
Commercial:
www.teraranger.com
[email protected]
[email protected]
9