TEQSAS Speakerchecker TQX Manual Download Page 4 | Manualshive

Page: 4 / 8

TEQSAS Speakerchecker TQX Manual Download Page 4

XLR output (bottom):

For output of balanced line signals

Notice:

The XLR output is transformer-balanced. A signal fed to the XLR input is output to
the XLR output when the unit is switched off. Thanks to the galvanic isolation, the
device offers the characteristics of a DI box with the additional option of level
adjustment via the volume control.

USB socket (bottom):

This can be used to charge the battery of the device with the included charger.

The internal memory card can also be accessed.

Notice:

To access the internal SD memory card, the unit must be turned on. As soon as the
USB cable is connected to a computer, you can choose between "Storage Mode"
or "Power Mode" in the display.
To access the memory, select "Storage Mode".
To charge the TQX during operation using the supplied power supply, select
"Power Mode". The device can continue to be used as normal.
The charging process via a computer interface can only take place when the unit is
switched off. We recommend a USB 3.0 interface.

Volume control (bottom):

The volume control can be used to adjust the signal strength at the

Speaker outputs, on headphone output/internal speaker

and at the XLR output.

«
...
2
3
4
5
6
...
»

Summary of Contents for Speakerchecker TQX









Reviews:

No comments