Instruction manual for Laser Profiling System-PDA - version of April 2018
Page 2 / 14
•
Set the target height above the reference point
using the buttons :
Reference line = reference point level + target height
the target height is the searched value. This value
can be positive or negative
•
Aim at a point of reference height and click on
the screen or press the « FIRE » button of the
laser until you hear a beep.
•
Press the button on the right side of the
PDA
(1)
to go to the next step.
Step 3 : measure the height of the face
•
Aim at the crest of the face and click on the
screen or press the « FIRE » button of the laser
until you hear a beep.
•
Press the button on the right side of the PDA
(1)
to go to the next step or the button on the left
side of the PDA
(2)
to return to the previous
step.
2 1
