Instruction manual for Laser Profiling System-PDA - version of April 2018
Page 1 / 14
A - INSTRUCTION MANUAL OF LASER PROFILER-PDA
I - HOW TO DO A MEASUREMENT
Step 2 : setting of the height reference
•
either each profile indepedently. Each profile has so its own reference
level. (level 0)
•
or all the profiles bound to a reference level
(All heights measured points are referenced to this level 0 -
on the picture
below)
The calculation of the depth of each hole will be linked to the searched
mark (mark line).
1. Connect the cable of the PDA ;
2. Connect the cable to the laser ;
3. Power on the laser ;
4. Power on the PDA ;
5. choose the language to use.
(Menu « File
⇒
Language »)
Step 1 : enter the filename
•
Menu « File
⇒
FileName »
Enter a filename using the touch keyboard.
This name will be followed by the date.
CONNECTING AND START-UP
Important
: before any measurement verify,
that the laser stays horizontal on its tripod
