3.1.9. Turn sealer handle 2 from yourself and achieve, that dies 19, set in die holder,
easily passed die 19, set in frame 4, after that tighten the screws 74, fixing this die.
3.2.
Assembly on tension unit.
3.2.1. Screw the screw 49 into guide arm 47 and fix it by washer 45 (see p. 2.3.11).
3.2.2. Set guide arm 47 with screw 49 and washer 45 into the groove of handle 3 and fix
it by screw 55 (see p. 2.3.10).
3.2.3. Knock in bearing 87 into handle 3 (see p. 2.3.9).
3.2.4. Set bearing 88 on feedwheel shaft 25 (see p. 2.3.8).
3.2.5. Set tension pawl 28 with spring 27 into handle 1 and fix it by screw 36 (see p.
2.3.7).
3.2.6. Connect weedwheel shaft 25 with support plate 31, handle 1 and ratchet wheel 29
(see p. 2.3.6).
3.2.7. Set into support plate 31 tension pawls 26, 35, springs 27 and fix them by screw
37 (see p. 2.3.5).
3.2.8. Set into feedwheel shaft 25, projecting from handle 1 washer 38 and fix it by pin
40 (see p. 2.3.4).
3.2.9. Set into feedwheel shaft 25 handle 3, feedwheel 24 and knock in it bearing 88 so,
support plate 31 tightly adjoined to handle 3, and the end of feedwheel shaft 25
performed from bearing 87 (see p. 2.3.2, 2.3.3).
3.2.10. Put on feedwheel shaft 25, performed from bearing 87, washer 42, washer 38
and fix it by pin 40 (see p. 2.3.1).
3.3. Connecting of tension and cutting units
.
3.3.1. Connect tension and cutting units with the help of feedwheel support shaft 21, fix
it with pin 72 (see p. 2.2.4, 2.2.5).
3.3.2. Put in frame 4 spring 34 and screw stopper 45 (see p. 2.2.2, 2.2.3).
3.3.3. Fix guide arm 47 in side cover 5 by screw 53 (see p. 2.2.1).
22
