SKIN TYPE SELECTOR BUTTON:
*see diagram page 2
This allows you to choose skin type: fair or olive skin, indicated by the colour of light 1.
Each additional push on button 1 changes the skin type and is accompanied by a beep.
HAIR TYPE SELECTION BUTTON:
*see diagram page 2
This allows the start-up code and hair type selection to be recorded: fine, medium or pale hair, or thick or dark hair,
indicated by the colour of light 2.
Each additional push on button 2 changes the hair type and is accompanied by a beep.
STOP BUTTON: *
see diagram page 2
This allows the start-up and stop codes of the appliance to be recorded.
When button 3 is held down, the appliance emits four beeps and then switches off automatically.
START-UP CODE:
*
see diagram page 2
The appliance start-up code has four digits and is input by pressing the following buttons one after the other:
3–2–
2–3
.
If the correct code is input, the appliance emits five beeps and is put on standby.
If the incorrect code is input or if it takes longer than ten seconds, the appliance emits ten beeps and the code must
be re-entered.
SKIN TYPE LIGHT:
(individual adjustment)
*see diagram page 2
With two colours,
light 1
indicates skin type:
• green light
: pale skin
• red light
: olive skin.
HAIR TYPE LIGHT:
(individual adjustment)
*
see diagram page 2
With two colours,
light 2
indicates hair type:
• green light
: fine, medium or fair hair
• red light
: thick or dark hair.
TRIGGER SAFETY LIGHT:
*see diagram page 2
Blue
light 3
indicates that the appliance is ready to function if the gel has been applied to the skin and the head is
fully pressed onto the treatment area.
If so, the flash is ready for firing.
LAMP SAFETY LIGHT:
*see diagram page 2
Green
light 4
indicates that the power supply to the lamp is correct.
If so, the flash is ready for firing.
TRIGGER:
This allows the light flash to be fired with each push. If the trigger is held down the flash fires every five seconds, a
maximum of three times.
Eac h push o f th e tr igg er is accompanied by a beep.
