(3)
Place the handlebar at an appropriate position, make sure
the "cross symbol" is located at the center.
Once the bolts and the handlebar are in the right place,
tighten the bolts fully with appropriate force.
(2)
Use a 4mm hex key to install the 4 bolts by turning clockwise.
The sequence is shown in the picture above. Please do not
fully tighten them yet.
The max torque of these 4 bolts is 6Nm. If the handlebar is installed correctly, the
brake lever should be 45°to the ground once the front wheel is installed.
05
Install the handlebar
(1)
7