www.tentipi.com
Before using the product, please read “Care instructions, hints and advice” which is found on the memory stick that was included when you purchased your tent.
The toggles at the bottom are attached direct to
the rings. There are also inner floor tensioners at
each end of the long side of the inner-tent. Use
them to adjust the tautness of the floor.
Stretch the inner-tent floor by
tightening the floor tensioners on
the outside as well, making sure
the tension is evenly distributed.
To make the floor of the inner-tent as smooth as
possible, it is important to first stretch the long side of
the floor at the two points indicated in the picture.
Attach the inner-tent to the fastening points near the top of the Nordic tipi. Five
fastening points are used for a half inner-tent.
The toggles are pulled through the rings at the top
of the Nordic tipi and fastened in the lower rings.
Attach to the wall, first in the middle and
then at the bottom. The toggles in the
middle are pulled through one ring and
then attached to the other one.
Assembling a half inner-tent cont.
