Step 5
4
Next, all six valance straps must be attached to secure the canopy to the
frame. To do this, locate the valance straps found at the halfway point of the
inside of the valance. Wrap the longer end of the strap down, and back up
through the connecting element on the scissor pieces – snapping it back into
the buckle.
Step 6
Pull the strap on the buckle to tighten the valance strap until the valance is
taut. Repeat these two steps for the remaining five legs.**When taking the
tent down, be sure to unbuckle these valance straps.**
Step 7
Lastly, extend the legs to the desired height by pushing in the push button on
the inside of the legs and pulling up until the legs snap into place. First extend
the four corner legs and finally extend the two intermediate legs.
10x20, 13x20, 13x26
