background image

2

HEXAGON PAVILION

If you have questions about installation, maintenance, or take down, please call us at (800)426-9496.  Our goal 
is that you are completely satisfied with our products.  Please read this installation manual carefully and follow 
all instructions contained herein.  Please note that the installer is responsible for the site selection, installation 
and use.  Do not erect during inclement weather and follow all safety procedures during the installation and 
take down process.

Please contact all utility companies for underground services.  In many states, the utilities work together and 
have formed a Utility Locating Service.  It is your responsibility to locate all the underground services, including 
speaking to the owner about irrigation, pool and other special services that they may have installed.  Also, 
please note that special precautions should be taken such that any overhead powerlines are duly noted and 
avoided during the tent erection process.

THANK YOU FOR YOUR PURCHASE!

TentCraft Inc in no way represents the estimated holding power to be true in all cases.  It is an 
estimate,  and  as  such,  does  not  imply  that  the  figures  are  sufficient  to  hold  any  tent  securely  in 
windy or adverse weather conditions.  The tent installer accepts sole responsibility for the safe 
installation, teardown, and maintenance of any tent.  TentCraft does not represent in any way that 
the materials provided with the purchase of the tent are sufficient enough to hold it up in windy or 
adverse weather conditions.  There is no way for TentCraft to know the site conditions or the 
weather conditions at the event.  This leaves us unable to recommend the adequate amount of 
holding power needed to hold the tent safely in position.  Furthermore, we are not responsible for 
the methods which the installer uses to erect the tent or anchor it in position.  Installers MUST be 
empowered to deem the tent unsafe for occupancy if/when the weather becomes unstable.  

Summary of Contents for HEXAGON PAVILION









Reviews: