Tentacle Sync V1.2 Operating Manual Download Page 3

INTENDED USE 

 

This device is only intended for use on suitable cameras and audio recorders. It must not be connected to other devices. The 
device is not waterproof and should be protected against rain. For safety and certification reasons (CE) you are not 
permitted to convert and/or modify the device. The device can be damaged if you use it for purposes other than those 
mentioned above. Moreover, improper use can cause hazards, such as short circuits, fire, electric shock, etc. Read through 
the manual carefully and keep it for later reference. Give the device to other people only together with the manual. 

SAFETY NOTICE 

A guarantee that the device will function perfectly and operate safely can only be given if the generally standard safety 
precautions and device-specific safety notices on this sheet are observed. The rechargeable battery integrated in the device 
must never be charged in an ambient temperature below 0 °C and above 40 °C! Perfect functionality and safe operation can 
only be guaranteed for temperatures between -20 °C and +60 °C. The device is not a toy. Keep it away from children and 
animals. Protect the device from extreme temperatures, heavy jolts, moisture, combustible gases, vapors and solvents. The 
safety of the user can be compromised by the device if, for example, damage to it is visible, it doesn‘t work anymore as 
specified, it was stored for a longer period of time in unsuitable conditions, or it becomes unusually hot during operation. 
When in doubt, the device must principally be sent in to the manufacturer for repairs or maintenance. 

DISPOSAL / WEEE NOTIFICATION 

This product must not be disposed of together with your other household waste. It is your responsibility to dispose 
of this device at a special disposal station (recycling yard), at a technical retail center or at the manufacturer. 

FCC DECLARATION 

This device complies with Part 15 of FCC guidelines. Its operation is subject to both of the following conditions: (1) 
This device is not permitted to cause any radio interference, and (2) this device must be capable of absorbing all 
received interference, including interference that can cause undesirable functionality. 

 

INDUSTRY CANADA DECLARATION 

This digital device complies with the Canadian regulatory standard CAN ICES-3 (B)/NMB-3(B). 

CE DECLARATION OF CONFORMITY   

Tentacle Sync GmbH, Eifelwall 30, 50674 Cologne, Germany

declares herewith that the following product:

Tentacle Sync Box Timecode-Generator

complies with the provisions of the directives named as follows, including changes in them that apply at the time of the 
declaration. 

This is evident from the CE mark on the product. 

- EN 55022:2010 + AC:2011 

- EN 55024:2010 

- EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 + A2:2013 

Cologne, 01.01.2016 

        Ulrich Esser, CEO

Summary of Contents for V1.2













Reviews: