TX-1 Series Instrument
www.tensitron.com
pg. 11
▪
Scroll to the description to rename and press ENTER.
▪
Input your custom name by using the up and down arrows to select
each number, letter, or character, followed each time by ENTER.
▪
Continue pressing ENTER until all spaces in the description have
values, including blank spaces.
▪
Once your new name has been entered you will automatically be
returned to the SETUP screen.
o
Resolution
To either increase or decrease the Resolution of the tension readings:
▪
Scroll to SETUP and press ENTER.
▪
Scroll to RESOLUTION and press ENTER.
▪
Select your preference: 5 or 10 Grams for the Model TX-5000 series,
1 or 5 Grams for the TX-1000 series, or 0.1 to 1 Grams for the TX-
125 series. Then press ENTER.
o
Length Units (Optional feature)
Use this feature to select the unit for measuring length.
▪
Scroll to SETUP and press ENTER.
▪
Scroll to Length Units and press ENTER.
▪
Select your preference: Meters or Feet, and press ENTER.
o
Re-Cal Tension: See description at the end of this booklet.
O
NLY PERFORM THIS IF YOU ARE A QUALIFIED CALIBRATION HOUSE USING
NIST-
CERTIFIED
CALIBRATION WEIGHTS
.
N
OT USED FOR CHECKING ACCURACY
.
T
O CHECK ACCURACY
,
REFER TO
S
EC
.
7:
C
HECK
A
CCURACY
.
o
Audio
To turn the Beep ON or OFF:
▪
Scroll to SETUP and press ENTER.
▪
Scroll to AUDIO and press ENTER.
▪
Select ON or OFF and press ENTER.
o
Backlight
To adjust the visual intensity of the LCD screen:
▪
Scroll to SETUP and press ENTER.
▪
Scroll to BACKLIGHT and press ENTER
▪
Select Low, Medium or Full intensity and press ENTER.
o
Set-Point Menu
This feature displays tension as a colored bar on the main display. The colored
bar advances as tension increases, and retracts as tension decreases. You can
define a safe operating tension range. For tension measurements within this
range, the bar is green. Below the range, the bar is amber. Above the range,
the bar is red. To adjust the Set Point Menu:
▪
Scroll to SETUP and press ENTER.
▪
Scroll to SETPOINT MENU and press ENTER.
