9. CONTROLS AND DISPLAY
7
8
10. CONTROLS
ON/OFF
To turn the unit ON
, press the ON/OFF button on
the side of the unit and hold for 2 secs until the
display shows.
To turn the unit OFF
, press the ON/OFF button on
the side of the unit and hold for 2 seconds until the
display stops.
The unit will turn OFF automatically :
• When the Timer reaches zero,
• If it is left at zero strength for more than 5 minutes.
At first use, or after changing batteries, the display shows that
the unit is automatically set in Programme A at zero strength.
On the top of the XL-Y1 unit there are four coloured buttons:
STRENGTH CONTROLS
ON/OFF
Channel 1
Strength DOWN
Channel 1
Strength UP
Channel 2
Strength UP
Channel 2
Strength
DOWN
Time Selected
Programme
selector
Channel 1
Strength
Channel 2
Strength
Programme
selected
Keypad Lock
Low Battery
Time Selector
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
The
BLUE BUTTONS
, marked
▲
,
▼
are
strength controls.
The left hand buttons change strength in the
left hand lead, Ch1, and the right hand buttons
change the right hand lead, Ch2.
To increase strength in steps of 1, press and release the top part
of the two blue buttons marked
▲
.
The strength levels are shown on the LCD.
The strength control buttons will not operate
until the unit is properly connected to you. Touch
TENS detects a disconnection and automatically
returns the strength to zero.
