TensCare Sports TENS 2, Instructions For Use Manual

Page: 15 / 44

10
6.1 Switch ON
Press
Unit will display the last programme used.
Backlight will turn off 5 seconds after the last button press
Press again to turn off.
6.2 Select MODE
Press the M button.
Display will cycle through TENS/EMS I,II,III /MASS
(5 choices)
Modes EMS I, II, and III are for use on body areas with
Small, Medium and Large muscles. ( See Programmes)
Each EMS programme has a WARM, WORK, and COOL
phase.
Note: Intensity must be zero before MODE can be changed,
otherwise PAUSE is activated
6.3 Select Programme
Press the P Program to cycle through the available programmes.
The Hz and uS settings for each programme are displayed
TENS 1-12
EMS 1-11
MASSAGE 1-10
6.4 Set Treatment Timer
The default setting for preset programmes is shown.
To alter the Treatment Timer setting, press
Menu+/-
The Timer display will flash.
Use +/- buttons to adjust the treatment time
Choices are: Continuous, 1-90 mins
6.5 Manual Settings
When a programme has manual settings available, MANUAL will
be displayed.
Press Menu + Menu - buttons to cycle through parameters
Selected Parameter flashes
Press +/- buttons to adjust setting.
Press return button to accept change
Flashing stops