22
To unlock the programme, take the same step. i.e. Press
INTENSITY
▼
till it reaches zero,
then press & hold the LOCK key for 3 seconds.
7.8 Memory Mode
Once you set intensity >0, the Usage Timer automatically and accumulatively counts
your total usage up to 999 hours 59 minutes.
To enter MEMORY MODE and view the Usage Timer, set
intensity to zero, then press and hold the
MODE
key for 3
seconds.
•
The number at bottom left shows the number HOURS,
and at bottom right the number of MINUTES.
•
The number at the top left shows the numbers of uses.
Press the
MODE
key again to return to the previous normal
display. To reset the Usage Timer to zero, press the
CH2
▼
key and
MODE
key together for 3 seconds.
8.0
Programmes
Programme table:
P1
Constant. The pulse frequency is selectable. 2-16-Hz
P2
2-100 Hz sweep over cycle time
P3
2-100 Hz sweep over cycle time
P4
80-150 Hz sweep over cycle time
P5
The pulse frequency varies set LOW frequency to set HIGH frequency over
Cycle Time and back. The transition is ramping (triangular wave function).
P6
The pulse frequency varies from set LOW frequency to set HIGH frequency
over Cycle Time and back. The transition is abrupt (square wave function).