TENSPros
15
14
8. Ramp Time Control
This dial controls the time intensity of current output that increases
from 0 to the setting level. When the ramp time is set, each
contraction may be ramped in order that signals come on
gradually and smoothly. There are 3 choices of ramp time - 1,3,5
seconds.
9. Check/Replace the Battery:
Over time, in order to ensure the functional safety of EMS, changing
the batteries is necessary.
1. Make sure that both intensity controls are switched to off
position.
2. Slide the battery compartment cover and remove.
3.Remove the battery from the compartment.
4.Insert the batteries into the compartment. Note the polarity
indicated on the batteries and in the compartment.
5. Replace the battery compartment cover and slide to close.
Chapter 19 : BATTERY INFORMATION
The EMS 5.0 can be used with 6F22 rechargeable
battery when necessary.
If you use rechargeable battery, please follow the
following indication.
5. Pulse Rate Control:
This dial determines how many electrical impulses are applied
through the skin each second. By turning these controls, the
number of current im pulses per second (Hz) for both channels
has 3 options 5, 30 and 100 Hz. Push this dial to select the
position desired.
6. Contraction Time Control
The contraction time control adjusts the time of stimulation. By
turning this control, the contraction time can be pre-set. The
range is adjustable from 1 second to 30 seconds. The contraction
time of EMS device can be changed by turning this dial.
7. Relaxation Time Control
This dial determines the time of relaxation. The stimulation ceases
at set ting relaxation time and then re-start in a cycle pattern. The
relaxation time of both channels is changed by turning this dial.
The range of it is adjustable from 1 second to 45 seconds.
PDF created with FinePrint pdfFactory trial version
