TENSPros
19
18
Chapter 23Conformity to Safety Standard
The EMS 5.0 devices are in compliance with the EN60 601-1:
1990+A1:1993+A2:1995.
Chapter 24 : WARRANTY
All EMS 5.0 models carry a warranty of one year from the date of
delivery. The warranty applies to the stimulator only and covers both
parts and labor relating thereto.
The warranty does not apply to damage resulting from failure to
follow the operating instructions, accidents, abuse, alteration or
disassembly by unauthorized personnel.
Chapter 21: SAFETY-TECHNICAL CONTROLS
For safety reason, check your EMS 5.0 each week based on the
following checklist.
1. Check the device for external damage.
-
deformation of the housing.
-
damaged or defective output sockets.
2. Check the device for defective operating elements.
-
legibility of inscriptions and labels.
-
make sure the inscriptions and labels are not distorted.
3. Check Led
-
led must be illuminated when switched on.
4. Check the usability of accessories.
-
patient cable undamaged.
-
electrodes undamaged.
Please consult your distributor if there is any problem on device and
accessories.
Chapter 22 MALFUNCTIONS
Should any malfunctions occur while using the EMS, check
- whether the switch/control is set to the appropriate form of
therapy. Adjust the control correctly.
- whether the cable is correctly connected to the device. The
cables should be inserted completely into the sockets.
-
whether the impulse display led is illuminated. If necessary,
insert a new battery.
- for possible damage to the cable. Change the cable if any damage
is detected.
* If there is any other problem, please return the device to your
distributor. Do not try to repair a defective device.
PDF created with FinePrint pdfFactory trial version
