7.
With the help of an associate, raise the remaining EUR
upright set (from starter unit) and the ZTP upright set
and connect with left to right channel beams Be
sure the channel beams are fully seated.
9a.
Attach the wall tie to the top of the unit on the left,
right and middle posts at the back of the unit. Taller
units require additional wall ties (included), for support.
NOTE: Wall Ties are REQUIRED to be used
for unit stability on Single Entry Units.
9b.
Assemble your second unit by following the same steps
listed. Attach the cross aisle ties to the top and bottom
of the left, right and middle posts.
For Single Entry Units
For Double Entry Units
8.
Continue to build your shelf levels by placing left to
right channel beams at the desired locations.
