SHELF
6.
Your cubby locker is now complete!
Shelf clips inserted
into slot of partition.
Shelf cutouts align with clips.
3.
Place shelf clips (Ref. No. 1) at the desired shelf locations.
Each shelf uses four shelf clips, two in the front slots
of the partition (Ref. No. 4) and two in the rear slots.
5.
To attach the coat hook (Ref. No. 3), place the hook
under the shelf and align with the holes in center of
the shelf. Use the provided nuts (Ref. No. 6) and bolts
(Ref. No 5) to secure the hook to the shelf.
4.
Align the shelf so the cutouts on the sides of the shelf
are over the clips. Tap the shelf down in all four corners.
Repeat this step until you have placed all shelves.
