Tennsco CC-30 Assembly Instructions/Parts Manual Download Page 2

Page: 2 / 4

ASSEMBLY OF CUBBY LOCKER

Two people are recommended for assembly. Approximate assembly time: 5-10 minutes.

The reference numbers used throughout this sheet refer to the illustration on the back cover.

This is to help you to identify the various parts as they are mentioned.

Shelves are secured to the bottom of the unit for

shipping. They are held in place by two shelf clips which

should be removed to be used later. To remove the

shelves, pull the shelf bundle forward and remove them

from the unit.

Remove the shelves (Ref. No. 2) from the cabinet.

The shelves are bundled together with plastic wrap.

They must be separated before installing into the unit.

Shelf clips are located between the wrapped shelves.

NOTE: When recieving a 30” or

40” high cubby, the shelves will

be under the locker body for

shipping purposes.

NOTE: Shelf clips are used upside down for shipping.

NOTE: The front of the shelf has an extra bend.

Shelves must be separated.

SHELF CLIP

SHELF

⁭

Summary of Contents for CC-30

Page 1: ...eller where goods are damaged during shipment or where the date stamps on the goods have been defaced modified or removed UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW a ALL IMPLIED...

Page 2: ...hich should be removed to be used later To remove the shelves pull the shelf bundle forward and remove them from the unit 2 Remove the shelves Ref No 2 from the cabinet The shelves are bundled togethe...

Page 3: ...slots of the partition Ref No 4 and two in the rear slots 5 To attach the coat hook Ref No 3 place the hook under the shelf and align with the holes in center of the shelf Use the provided nuts Ref No...

Page 4: ...Additional hardware may be included for replacement purposes Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged Tennsco makes every effort to ensure...