8
| ENGLISH
Appliance interior and exterior
∙
Clean appliance often, preferably after each cookout.
∙
Appliance should be cleaned at least once a year.
∙
Cooking surfaces:
If a bristle brush is used to clean any of
the appliance cooking surfaces, ensure no loose bristles
remain on cooking surfaces prior to grilling. It is not recom-
mended to clean cooking surfaces while appliance is hot.
∙
Plastic surfaces:
Wash with warm soapy water and wipe
dry. Do not use citrisol, abrasive cleaners, degreasers or a
concentrated appliance cleaner on plastic parts, as this can
result in damage and/or failure of the parts.
∙
Porcelain surfaces:
Because of glass-like composition,
most residue can be wiped away with baking soda/water
solution or specially formulated cleaner. Use nonabrasive
scouring powder for stubborn stains.
∙
Painted surfaces:
Wash with mild detergent or nonabrasive
cleaner and warm soapy water. Wipe dry with a soft nona-
brasive cloth. Do not apply caustic appliance/oven cleaner
to painted surfaces.
∙
Stainless steel surfaces:
To maintain your appliance’s high
quality appearance, wash with mild detergent and warm
soapy water and wipe dry with a soft cloth after each use.
Baked-on grease deposits may require the use of an abra-
sive plastic cleaning pad. Use only in direction of brushed
finish to avoid damage. Do not use abrasive pad on areas
with graphics.
Cleaning and care
Cooking grate
1. Burn off the cooking grate after every use for approx. 15
minutes. This will keep food residues to a minimum.
2.
Wait for the appliance to cool down completely.
3. Remove stubborn stains with mild soapy water or a nona-
brasive scouring powder.
4. Rinse with fresh water afterwards and dry with a soft lint
free cloth.
WARNING
Always set the control knobs to off position and close the gas cylinder valve when appliance is not in use.
Make sure the appliance has cooled down.
Burners
1. Remove cooking grate.
2. Brush entire outer surface of the burner to remove food
residue and dirt.
3. Clean any blocked port carefully with a wire e.g. a paper
clip.
4. Check each burner for damage, corrosion or enlarged
holes. If any damage is found the burner must be re-
placed.
Grease box
1. After every use, clean the grease box with mild soapy
water.
Do not remove the grease box during use.
2. Rinse with fresh water afterwards and dry with a soft lint
free cloth.
TGP-2_Plancha_30mbar_V0.7_14-09-24.indd 8
25.09.14 15:19
