9
Tennant EH2 (01/2014)
EN
English
9
Vacuum
Hose
LOADING MACHINE
Load machine with assistance by utilizing the 2 top loading
wheels as shown. Secure machine with tie down straps. Empty
solution tank and recovery tank before loading machine.
SERVICING MACHINE
All repairs must be performed by a quali
¿
ed service technician.
FOR SAFETY
When ser
Y
icing machine
unplug cords from wall outlets. Wear
appropriate personal protection
equipment as needed.
WARNING
Use caution when ser
Y
icing
machine
components may be hot.
The machine is designed to hinge open for ease of servicing. To
access the internal components, remove the two lock plates at
back of machine and carefully hinge open machine. Empty tanks
before opeing machine. Reconnect the vacuum hose whn closing
machine. Replace lock plates.
STORING MACHINE
1. Remove all water from solution tank by using the hose from
the machine to vacuum water into the recovery tank.
2. Drain and rinse out recovery tank.
3. Attach solution hose to machine and wand. Turn on pump
and hold lever on wand to run pump dry. Turn off pump.
4. Disconnect power cords from machine. Neatly coil the power
cords and store on machine.
5. Store extractor with tank covers off to promote air circula-
tion.
6. Store machine in dry area.
WARNING
Do not e
[
pose to rain. Store
indoors only.
ATTENTION
If storing machine in free
]
ing temperatures
be sure that machine solution system and pump are
completely drained and dry.
