5680/5700/5700XP
ec-H2O
Kit
INSTALLATION INSTRUCTIONS --
Continued
Page 6 of 7
KIT NO. 9006309--5680, 9006310--5700/5700XP
9005074 Rev. 01 (07--09)
Tennant Company
Customer Service: (800) 553--8033 or (763) 513--2850
SCRUB HEAD ASSEMBLY:
Disk Model:
1. Reconnect the actuator to the scrub head.
2. Connect solution hoses to the scrub head as
shown (Figure 23).
Solution feed hose
from solution tank
ec--H2O
Solution Hose
Clamp
[54333]
Fig. 23
3. Replace the front machine shroud and reconnect
the battery cable.
Cylindrical Brush Model:
Spray Bar Kit required:
9006743 --For 700mm Cyl Brush Model
9006744 --For 800mm Cyl Brush Model
9006745 --For 900mm Cyl Brush Model
1. Remove the hose guide bracket and the T--fitting
from the scrub head and discard (Figure 24).
Remove
T--Fitting
Remove
Hose Guide
Bracket
NOTE:
Install a
.50 Flat Washer
[32486] in its place
(not included with kit)
Fig. 24
2. Reconnect the actuator to the scrub head.
3. Install spray bar kit and connect solution hoses as
shown (Figure 25).
Fig. 25
4. Replace the front machine shroud and reconnect
the battery cable.
Screw (4) [76099]
Washer (4)
[01685]
Solution feed hose
from solution tank
ec--H2O
Solution Hose
Screw (3)
[11635]
Washer (3)
[01684]
Bracket
[1014673]
Spray Bar
[1046049--700mm Model]
[1025276--800 & 900mm Models]
Screw (2) [12273]
Washer (2) [01685]
Spray bar cap (2) [1025580]
Angle Bracket
[1046020--700mm Model]
[1026023--800mm Model]
[1027642--900mm Model]
Spray Bar Bracket
[1014993--700mm Model]
[1014957--800 & 900mm Models]
Fitting
[64743]
Clamp [54333]
