Page 2 of 3
KIT NO. 9002378
INSTALLATION INSTRUCTIONS -- Continued
9002379 Rev. 00 (02--06)
Tennant Company
Customer Service: (800) 553--8033 or (763) 513--2850
8. Place one of the star washers from the kit
between the control panel mount and the
actuator mount and reattach the bolt and
flat washer (Figure 5).
Fig. 5
9. Remove one of the two bolts and flat
washers used to mount the actuator
bracket to the main frame. Place one of the
star washers from the kit under the flat
washer and place back onto machine. To
ease reassembly use super glue to hold the
hardware in place (Figure 6).
Fig. 6
10. Reattach the seat support shroud, seat and
the FaST detergent pack and pack holder.
11. Remove bolt and flat washer (A) from pedal
mounting bracket -- discard bolt; save
washer. Replace with one star washer, bolt
and ground wire from the kit, along with the
flat washer that was saved (Figure 7).
A
Fig. 7
12. Route the wire inside the steering column
shroud from (A) to (B) (Figure 8).
A
B
Fig. 8
13. Attach opposite end of the ground wire to
the jack bracket bolt (B) as shown
(Figure 9).
B
Fig. 9
