MAINTENANCE
79
8210 330190 (6--04)
To access the GM engine belt and check the
tension, raise the hopper and engage the hopper
support bar.
WARNING: Raised hopper may fall.
Engage hopper support bar.
Lift the lintel seal from its retainer and pull open to
access the GM engine belt.
Adjust the GM engine belt tension by loosening the
two hold down bolts and then turning the bolt on the
tension arm. Retighten the hold down bolts. Access
to the tension arm is located behind the front door
access panel in the operator station.
STATIC DRAG CHAIN
The static drag chain prevents the buildup of
static electricity in the machine. The chain is
attached to the machine directly in front of the
scrub head and brushes.
Make sure the chain is touching the floor at all
times.
