OPERATION
8210 330190 (1--98)
16
SWEEP SWITCH
The sweep switch controls the sweeping
operations.
If the sweep switch is pressed while the machine
is idle or in the scrub mode, the hopper door will
open, the main sweeping brush will lower and
activate, the sweep vacuum fan will activate, the
side brush will lower and activate, and the engine
speed will increase to the
fast
speed.
Sweeping operations on: Press the sweep
switch. The indicator light next to the switch will
illuminate.
Sweeping operations off: Press the switch again.
The indicator light next to the switch will go out.
Sweeping in wet conditions: Press the vacuum
fan switch to disable the fan. The indicator light
next to the switch will go out.
NOTE: If the hopper is raised, even slightly, the
raised hopper icon will replace the sweep icon on
the control panel display and the sweeping
operations will not start.
SIDE BRUSH SWITCH
The side brush switch controls the side brush
position and rotation. The main sweeping brush
must be operating for the side brush to work.
NOTE: The side brush operates automatically
when the main sweeping brush starts operating.
To sweep without using the side brush, press the
side brush switch.
Up and Off: Press the switch again. The indicator
light next to the switch will go out.
Down and On: Press the switch. The indicator
light next to the switch will illuminate.
NOTE: The side brush operates automatically
when the main sweeping brush starts operating.
To sweep without using the side brush, press the
side brush switch.
NOTE: If the hopper is raised, even slightly, the
raised hopper icon will replace the sweep icon on
the control panel display and the sweeping
operations will not start.
F
E
351648
F
E
351649
