OPERATION
8010 330100 (9--97)
18
HOPPER LIFT SWITCH
The hopper lift switch controls the position of the
hopper for emptying the debris.
FOR SAFETY: When using machine,
make sure adequate clearance is
available before raising hopper.
Lower hopper: Press and hold the top of the
switch until the hopper has lowered to the floor.
WARNING: Lift arm pinch point. Stay
clear of hopper lift arms.
Raise hopper: Press and hold the bottom of the
switch until the hopper reaches the desired height.
WARNING: Raised hopper may fall.
Engage hopper support bar.
HOPPER DOOR SWITCH
The hopper door switch controls the position of
the hopper door.
NOTE: The hopper door will automatically open
when the sweeping switch is pressed, regardless
of the position of the hopper door switch.
Open door: Press the bottom of the switch.
Close door: Press the top of the switch.
SWEEPING VACUUM FAN AND FILTER
SHAKER SWITCH
The sweeping vacuum fan and filter shaker switch
control the sweeping vacuum fan and hopper dust
filter shaker.
NOTE: The vacuum fan will NOT turn on if the
hopper is not in the lowered position.
Vacuum on: Press the top of the switch.
Vacuum off: Place the switch in the middle
position.
Filter shaker on: Press the bottom of the switch;
the filter will shake for 15 seconds then stop
automatically.
