Tennant 7400, Service Manual

Page: 15 / 322

GENERAL INFORMATION
1-13
7400 MM428 (6--01)
Interval Key Description Procedure
Lubricant/
Fluid
No. of
Service
Points
100 Hours
13 Cover seals Check for damage and wear -- 4
10 Scrub brush idlers Lubricate SPL 2
10 Scrub head skirts Check for damage and wear -- 2
-- Side brush skirt Check for damage and wear -- 1
200 Hours
6 Radiator hoses and clamps Check for tightness and wear -- 2
2 Parking brake Check adjustment -- 1
2 Brake pedal Check and adjust travel -- 1
1 Front wheel Lubricate SPL 2
support bearings
400 Hours
9 Rear wheel bearings Check, lubricate, and adjust SPL 2
4 Fuel filter Replace cartridge -- 1
6 Cooling system Flush WG 1
800 Hours 3 Hydraulic reservoir
Replace filler cap -- 1
y
Replace suction strainer -- 1
Change hydraulic fluid HYDO 1
4 Hydraulic fluid filter Change filter element -- 1
-- Hydraulic hoses Check for wear and damage -- All
1 Propelling motor
H
Torque shaft nut -- 1
1 Front wheel
H
Torque wheel nuts -- 1
12 Battery
H
Clean and tighten battery cable -- 1 y g y
connections
NOTE: Also check procedures indicted (
H
) after
the first 50-hours of operation.
NOTE: More frequent intervals may be required
in extremely dusty conditions.
LUBRICANT/FLUID
EO Engine oil, SAE--CC/CD rated . . . .
HYDO Tennant Company or approved hydraulic fluid .
WG Water and permanent-type ethylene glycol anti-freeze, --34
_
C (--30
_
F) . . .
SPL Special lubricant, Lubriplate EMB grease (TENNANT part no. 01433--1) . . .
DW Distilled water . . . .