ENGLISH
EN
5100 (02–01)
17
TROUBLE SHOOTING –continued
PROBLEM
CAUSE
SOLUTION
Poor water pickup.
Recovery tank is full and ball float has
been activated.
Empty recovery tank.
Ball float screen inside recovery tank
is clogged.
Remove screen and clean.
Clogged squeegee.
Clean squeegee.
Worn squeegee blades.
Replace squeegee blades.
Loose squeegee thumbscrews.
Tighten thumbscrews.
Vacuum hose connections are loose
or hose has a hole.
Push hose cuffs firmly on connections.
Replace hose if damaged.
Clogged vacuum hose.
Remove clogged debris.
Recovery tank inlet hole is obstructed.
Empty recovery tank and tilt tank side-
ways to access inlet hole, remove ob-
struction.
Defective tank gasket.
Replace gasket.
Loose drain hose plug.
Tighten drain plug.
Recovery tank lid not in place.
Properly position lid.
Loose vacuum motor.
Contact Service Center.
Battery charge level is low.
Charge batteries. Do not run machine
when battery meter is in the red zone.
SPECIFICATIONS
MODEL
Tennant 5100
LENGTH
99cm (39 in)
WIDTH
49.5cm (19.5 in)
HEIGHT
91cm (36 in)
WEIGHT
71kg (158lbs.), with batteries 131kg (290lbs.)
RECOVERY TANK CAPACITY
28.5L (7.5 Gal.)
SOLUTION TANK CAPACITY
28.5L (7.5 Gal.)
ES
t
SOLUTION FILL CAPACITY
42.5L (11.25 Gal.)
DRIVE SYSTEM
Brush driven
CLEANING RATE
1375m
2
per hour (14,800 sq. ft.)
CLEANING PATH WIDTH
43cm (17 in)
PAD DIAMETER
43cm (17 in)
PAD PRESSURE
Variable30–44kg. ( 65–95lbs.)
SQUEEGEE WIDTH
67cm (26.5 in)
TOTAL POWER COMSUMPTION
35A nominal
BRUSH MOTOR
.625 h.p., 185 rpm, 24V, 33A
VACUUM MOTOR
.75 h.p., 2–stage 5.7”, 24V, 15A, 560W
WATER LIFT
114cm (45 in)
BATTERIES
2–12V, 130AH
RUN TIME PER CHARGE
Up to 3 hours
DECIBEL RATING AT OPERATOR’S
EAR, INDOORS ON TILE.
69.5dB(A)
