ENGLISH
EN
BR2020/T (04–98)
5
MACHINE INSTALLATION
UNCRATING MACHINE
Carefully check carton for signs of damage.
Report damages at once to carrier.
To uncrate your machine, remove straps and
carefully lift or use a ramp to remove machine
from pallet.
ATTENTION: To prevent dust skirt
damage, carefully TILT machine back when
removing from shipping crate.
CAUTION: Install batteries
after removing
machine from pallet.
INSTALLING BATTERIES
WARNING: Wear protective gloves and
shield eyes when handling batteries. Battery
acid can cause burns.
WARNING: Keep sparks and open flame
away. Batteries emit hydrogen gases,
explosion or fire can result.
Recommended Battery Specifications:
Three 12 volt deep cycle batteries. Consult with
an Authorized Distributor for specific batteries.
Maximum battery dimensions are 78 mm W x 394
mm L x 362mm H.
FOR SAFETY: To prevent accidental
starting, be certain key is removed.
1.
Position machine on a level surface and set
parking brake.
Set Parking Brake
2.
Turn OFF all switches and remove key.
3.
Unlatch battery hood latches and open battery
compartment. Remove loose battery cables.
Open Battery Compartment
4.
Carefully install batteries into battery tray and
arrange battery posts as shown. After
batteries are in place remove battery handles
to allow clearance for battery hood.
BATTERY TRAY
CHARGER PLUG
MACHINE
FRONT
Battery Arrangement
WARNING: Do not drop batteries into
compartment! Battery and machine housing
damage may result. This damage is not
covered by Warranty.
5.
Connect cables to battery posts as shown.
(RED TO POSITIVE & BLACK TO
NEGATIVE)
CONNECT LAST
–
CHARGER PLUG
MACHINE
FRONT
BLK
BLK
RED
31
RED
Connect Battery Cables
6.
Double check cable connections and close
hood, fasten hood latches.
