8
CONTROL PANEL DISPLAY CODES:
Safety code
Cause
Actions to take
C22
Short circuit brush protection:
Reset by turning OFF the
stops all functions
machine and starting again
C14
Dissipater at high
The machine resets when
temperature. Activates if
temperature lowers under 176° F
temperature is over 194° F
FS0
Worn brushes
Replace brush
SP1
Brush motor restricted
Inspect brush for obstruction.
Restart machine to reset
Yellow led lit
Battery in reserve
Machine continues to work.
Only a warning that the battery
is near discharge
Red led flashes
Battery discharged
Machine stops all functions
Turn off machine and charge
the battery
P1.X
Sweeping mode 1 button
See programming
programming activated
P2.X
Sweeping mode 2 button
See programming
programming activated
SF.X
Filter shaker program
See programming
setting activated
X = A VALUE FROM “0” TO “5”
PROGRAMMING INSTRUCTIONS:
The program allows you to adjust the brush pressure and the frequency of the automatic filter shaker.
1.
Turn on the machine.
2.
Hold down the hourglass button located to the right of the display for about 5 seconds until a P1.X is displayed. X=
0 to 5
3.
P1 is the brush pressure setting for sweeping mode 1. You can change the value of X from 0 to 5 using the fan
button to increase and the filter shaker button to decrease. The higher the value the more brush pressure. Factory
setting is 2.
4.
Push the hourglass button once. The display will show a P2.X. This is the setting for sweeping mode 2. To change,
use the same procedure used in step 3. Factory setting is 4.
5.
Push the hourglass button once. The display will show a SF.X. X = the frequency in minutes the automatic filter
shaker will operate. To change, use the fan button to increase and the filter shaker button to decrease. Factory
setting is 3.
6.
To return to operational mode, hold the hour glass button down for about 5 seconds until the battery voltage is
displayed.
Hourglass Button
Fan Button
Filter Shaker Button
Brush Pressure Mode Buttons
For cleaning machines, parts & supplies click/visit www.southeasternequipment.net
For cleaning machines, parts & supplies click/visit www.southeasternequipment.net
